All Products
-
Brushless DC Motor
-
Brushless Permanent Magnet Motor
-
Gearbox Brushless Motor
-
Gearbox Stepper Motor
-
Hybrid Stepper Motor
-
Planetary Reducer Gearbox
-
Linear Stepper Motor
-
Frameless Servo Motor
-
Conveyor Roller Motor
-
DC Worm Gear motor
-
Stepper Motor Controller
-
BLDC Motor Driver
-
Integrated Stepper Motor
-
DC Brush Gear Motor
-
AC Servo Motor
-
Rod S****I purchased the 3-pack of the smaller steppers for my current ender 3 pro project. For my applications, they work perfectly. It's a great deal for quality motors, and I'm going to purchase another 10 packs.
-
Sam N***These are great motors and they are very strong. They are operating quietly, and also need them to release their hold every time a move is complete.
-
Jim S**Please develop more low noise gearbox and with better prices, so we can sell your products to more clients and gain larger markets. Thank you.
Contact Person :
Nora
Whatsapp :
8618661153149
Keywords [ 2 phase stepper motor driver ] match 41 products.
Mini Two Phase Stepper Motor Controller Card 48v 4.2A
Product Name: | Stepping Motor Driver |
---|---|
Maximum Output Current: | 4.2A |
Maximum Motor No-load Running Speed: | 4000RPM |
24vdc 2 Phase Stepper Motor Controller Chip 8A HTD2208A MAX220VAC
Product Name: | Stepping Motor Driver |
---|---|
Usage: | Match For Step Motor 86,110 And 130mm |
Basic Frequency: | 80MHZ |
2.24V 8 Leads Two Phase Stepper Motor 1.8 Degrees 0.9Nm 127 Oz In 57BYGH432 02
Product Name: | Hybrid Stepping Motor |
---|---|
Step Accuracy: | ± 5% |
Temperature Rise: | 80 ℃ Max |
50vdc 2.5 A Stepper Motor Controller Driver Two Phase Industrial
Product Name: | Stepping Motor Driver |
---|---|
Usage: | Drive Motor Of 28,35,39,42mm |
Use Occasion: | Avoid Dust, Oil And Corrosive Gases |
Integrated NEMA 17 Stepper Motor Controller Module 2 Phase Parallel Interface
Product Name: | Stepping Motor Driver |
---|---|
Power Supply: | 3.3V-5V Or 12V-24V |
Output Motor Current: | Peak 2A |
Nema23 Hybrid Stepper Motor 6 Lead Wire 2.8v 2.0A CE Certification
Product Name: | Hybrid Stepper Motor |
---|---|
Step Angle: | 0.9 ° |
Lead Wire: | 6 |
42mm Nema17 Integrated Stepper Motor 4 Wires 1.8 Step Angle
Product Name: | Integrated Stepper Motor |
---|---|
Step Angle: | 1.8 ° |
Hoiding Torque: | 4.5 Kg.cm |
Nema 17 Stepper Motor With Gearbox 42 Mm*42 Mm 12 V 30 Ohms 0.4 A
Product Name: | Gearbox Stepper Motor |
---|---|
Resistance: | 30 Ohms/Phase |
Insulation Resistance: | 100MΩ Min.500VC DC |
Integrated Stepper Motor With Driver Open Loop Or Closed Loop Control
Product Name: | Hybrid Stepper Motor |
---|---|
Step Angle: | 1.8 ° |
Lead Wire: | 4 |
1.8 Degree Hybrid Stepper Motor 4 Leads 6 Wires Nema 17 42mm 12V 1.7A
Product Name: | Hybrid Stepper Motor |
---|---|
Step Angle: | 1.8 ° |
Number Of Leads: | 4,6 |