-
Brushless DC Motor
-
Brushless Permanent Magnet Motor
-
Gearbox Brushless Motor
-
Gearbox Stepper Motor
-
Hybrid Stepper Motor
-
Planetary Reducer Gearbox
-
Linear Stepper Motor
-
Frameless Servo Motor
-
Conveyor Roller Motor
-
DC Worm Gear motor
-
Stepper Motor Controller
-
BLDC Motor Driver
-
Integrated Stepper Motor
-
DC Brush Gear Motor
-
AC Servo Motor
-
Rod S****I purchased the 3-pack of the smaller steppers for my current ender 3 pro project. For my applications, they work perfectly. It's a great deal for quality motors, and I'm going to purchase another 10 packs.
-
Sam N***These are great motors and they are very strong. They are operating quietly, and also need them to release their hold every time a move is complete.
-
Jim S**Please develop more low noise gearbox and with better prices, so we can sell your products to more clients and gain larger markets. Thank you.
57mm 1.8 High Torque Stepper Motor With Gearbox 15kg Cm 195 Oz In 1.5V 3A

Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xProduct Name | Stepping Gearbox Motor | Step Angle | 1.8 ° |
---|---|---|---|
Temperature Rise | 80 ℃ Max | Insulation Resistance | 100MΩ Min.500VC DC |
Ambient Temperature | -20℃~+50℃ | Dielectric Strength | 500VAC 1 Minute |
Housing Material | Powder Metallurgy | Bearing At Output | Sleeve Bearings |
Radial Load(10mm From Flange) | ≤450N | Shaft Axial Load | ≤200N |
Highlight | 57mm stepper motor 195 Oz In,gearbox stepper motor 195 Oz In,stepper motor 15kg cm 195 Oz In |
57BYGH636-79AG6 high torque 1.5V 3A Powder metallurgy stepper gearbox motor IP40
57BYGH636-79AG6 is consist of a DC 57mm stepper motor and a 56mm planetary gearbox. With the same load capacity, our powder metallurgy planetary gearbox has a higher lifespan than the traditional gearboxes. The key aspects are to improve efficiency and reliability in any mechanical system. There're also some cost-effective choices of material such as zinc alloy and engineering plastic.
This model is using a 56mm powder metallurgy gearbox, which can choose from the following reduction ratio:
Stage 1
1/4, 1/6
Stage 2
1/15, 1/18, 1/26
Stage 3
1/47, 1/66
Please scroll down to see more details about the gearbox
Electrical Specification
STEP ANGLE | °/STEP | 1.8 |
RATED VOLTAGE | V | 1.5 |
CURRENT | A/PHASE | 3 |
RESISTANCE | Ω/PHASE | 0.5 |
INDUCTANCE | mH/PHASE | 1.8 |
HOLDING TORQUE | kg.cm | 15 |
INSULATION CLASS | B |
*Products can be customized by special request.


GEARBOX Electrical Specification
Out diameter 56mm Powder metallurgy
Housing material | Bearing at output | Radial load(10mm from flange)N | Shaft axial load(N) | Shaft press-fit force max(N) | Radial play of shaft(mm) | Thrust play of shaft(mm) | Backlash at no-load (°) |
Powder metallurgy | sleeve bearings | ≤450 | ≤200 | ≤1000 | ≤0.03 | ≤0.1 | ≤1.5 |
Reduction ratio | Rated tolerance torque (Nm) | Max momentary tolerance torque (Nm) | Efficiency% |
Length L (mm) |
Weight(g) | Number of gear trains |
1/4 | 2.0 | 6.0 | 81% | 41.3 | 491 | 1 |
1/6 | ||||||
1/15 | 8.0 | 25 | 72% | 59.6 | 700 | 2 |
1/18 | ||||||
1/26 | ||||||
1/47 | 16 |
50
|
72% | 59.6 | 700 | 2 |
1/66 |
Mechanical Dimension

