-
Brushless DC Motor
-
Brushless Permanent Magnet Motor
-
Gearbox Brushless Motor
-
Gearbox Stepper Motor
-
Hybrid Stepper Motor
-
Planetary Reducer Gearbox
-
Linear Stepper Motor
-
Frameless Servo Motor
-
Conveyor Roller Motor
-
DC Worm Gear motor
-
Stepper Motor Controller
-
BLDC Motor Driver
-
Integrated Stepper Motor
-
DC Brush Gear Motor
-
AC Servo Motor
-
Rod S****I purchased the 3-pack of the smaller steppers for my current ender 3 pro project. For my applications, they work perfectly. It's a great deal for quality motors, and I'm going to purchase another 10 packs.
-
Sam N***These are great motors and they are very strong. They are operating quietly, and also need them to release their hold every time a move is complete.
-
Jim S**Please develop more low noise gearbox and with better prices, so we can sell your products to more clients and gain larger markets. Thank you.
Nema 14 Outer Diameter 36mm IP40 DC Brush Gear Motor 36 MM 24 V 94 RPM

Contact me for free samples and coupons.
Whatsapp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xProduct Name | DC Brush Gear Motor | Rated Voltage | 24 V |
---|---|---|---|
Rated Speed | 94 RPM | Motor Speed | 5000 RPM |
Reduction Ratio | 1:53 | Backlash At No-load | ≤1.5 Degree |
Bearing AT Output | Sleeve Bearing | Shaft Axial Load | ≤25N |
Cetification | CE ROHS ISO | Protection Level | IP40 |
High Light | 94 RPM DC Brush Gear Motor,IP40 DC Brush Gear Motor,Nema14 24v Dc Gear Motor |
Nema 14 Outer Diameter 36mm IP40 DC Brush Gear Motor 36 MM 24 V 94 RPM
A brushed DC motor uses a configuration of wound wire coils, the armature, acting as a two-pole electromagnet. The current's directionality is reversed twice per cycle by the commutator, a mechanical rotary switch. This facilitates flow of the current through the armature; thus, the electromagnet’s poles pull and push against the permanent magnets along the outside of the motor. The commutator then reverses the polarity of the armature's electromagnet as its poles cross the permanent magnets' poles.
A brushless motor, by contrast, utilizes a permanent magnet as its external rotor. In addition, it uses three phases of driving coils and a specialized sensor that tracks rotor position. As the sensor tracks the rotor position, it sends out reference signals to the controller. The controller, in turn, activates the coils in a structured way – one phase after the other.
Electrical Specification
SPECIFICATIONS WITH PLANETARY GEAR | ||
Rated Voltage | V | 24 |
Motor Speed | RPM | 5000 |
Rated Speed | RPM | 94 |
Reduction RATIO | 53:1 |
*Products can be customized by special request.
Mechanical Dimension
GEARBOX PART Electrical Specification:
36mm Zinc Alloy
Housing material | Bearing at output | Radial load(10mm from flange)N | Shaft axial load(N) | Shaft press-fit force max(N) | Radial play of shaft(mm) | Thrust play of shaft(mm) | Backlash at no-load (°) |
Zinc alloy | Porous bearings | ≤45 | ≤25 | ≤100 | ≤0.08 | ≤0.4 | ≤1.5 |
Reduction ratio | Rated tolerance torque (Nm) | Max momentary tolerance torque (Nm) | Efficiency% | Length (mm) | Weight(g) | Number of gear trains |
1/12 | 0.3 | 1.0 | 81% | 26.8 | 100 | 1 |
Mechanical Dimension
36mm Powder Metallurgy
Housing material | Bearing at output | Radial load(10mm from flange)N | Shaft axial load(N) | Shaft press-fit force max(N) | Radial play of shaft(mm) | Thrust play of shaft(mm) | Backlash at no-load (°) |
Powder metallurgy | sleeve bearings | ≤120 | ≤80 | ≤500 | ≤0.03 | ≤0.1 | ≤1.5 |
Reduction ratio | Rated tolerance torque (Nm) | Max momentary tolerance torque (Nm) | Efficiency% | Length (mm) | Weight(g) | Number of gear trains |
1/4 | 0.3 | 1.0 | 81% | 24.8 | 145 | 1 |
1/5 | ||||||
1/16 | 1.2 | 3.5 | 72% | 32.4 | 173 | 2 |
1/20 | ||||||
1/25 | ||||||
1/53 | 2.5 | 7.5 | 65% | 41.9 | 213 | 3 |
1/62 | ||||||
1/76 | ||||||
1/94 | ||||||
1/117 |
Mechanical Dimension
36mm Split Powder Metallurgy
Housing material | Bearing at output | Radial load(10mm from flange)N | Shaft axial load(N) | Shaft press-fit force max(N) | Radial play of shaft(mm) | Thrust play of shaft(mm) | Backlash at no-load (°) |
Powder metallurgy | sleeve bearings | ≤35 | ≤25 | ≤100 | ≤0.03 | ≤0.1 | ≤1.5 |
Reduction ratio | Rated tolerance torque (Nm) | Max momentary tolerance torque (Nm) | Efficiency% | Length (mm) | Weight(g) | Number of gear trains |
1/3.7 | 2 | 4 | 81% | 28 | / | 1 |
1/5.18 | ||||||
1/13.76 | 3 | 5 | 72% | 35.5 | / | 2 |
1/19.22 | ||||||
1/26.83 | ||||||
1/51 | 4 | 6 | 65% | 43 | / | 3 |
1/71.3 | ||||||
1/100 | ||||||
1/130 |
Mechanical Dimension
Gearbox Production
![]() |
![]() |
![]() |
Gearbox Assmenbly | Mass Produstion | Gearbox Motor Aging Test |
Hetai Production Process
Certificate
![]() |
![]() |
![]() |
Stepper motor ROHS report Date: June 09, 2021 |
BLDC Motor ROHS report Date: June 09, 2021 |
CE cetificate |
![]() |
![]() |
IATF 16949: 2016
Valid until: 02 June 2024
|
ISO 9001: 2015
Valid until: 02 June 2024
|
Market Range
Package&Delivery
Why Choose us
We offer you:
Engineering Support
Our professional team can help you to find the right and suitable motor for you. Our engineers have rich experience of motion control products in various industries, such as robots, packing machinery, textile machinery, medical instruments, printing machinery, intelligent logistics equipment, and so on.
![]() |
![]() |
![]() |
Find | Customise | Optimise |
Our team can help you find most suitable motor for the application from o ur vast selection of motors | We can design and customise the performance and exterior for your pecific use or assembly | For OEM projects, we have over 15 years experience od solving different problems in various application. We improve our product together with our customer. |
Manufacturing Support
Regardless of the volume of the order, we will provide the same service. Our engineering team is able to provide you with quick and accurate prototypes based on your custom requirements.
![]() |
![]() |
![]() |
Prototypes | Standard Batch | High Volume Batch |
1-10pcs | 500-5000pcs | over 5000pcs |
Large-scale production
Our Factory was founded in 1999 and the workshop area is over 15,000㎡. We have our own manufacturing line and CNC machining center, including precision CNC universal grinder brand name (Sweden), CNC brand name (Germany), DMG lathe and milling, DMG lathe, Mahr measuring instrument, Chinese precision cylindrical grinding machine, CNC lathe machine, automatic multi-head winding machine, automatic assembling line and so on.