Rod S****I purchased the 3-pack of the smaller steppers for my current ender 3 pro project. For my applications, they work perfectly. It's a great deal for quality motors, and I'm going to purchase another 10 packs.
Sam N***These are great motors and they are very strong. They are operating quietly, and also need them to release their hold every time a move is complete.
Jim S**Please develop more low noise gearbox and with better prices, so we can sell your products to more clients and gain larger markets. Thank you.
Nema 23 9.6 V 1A 1.8 Degree Stepper Motor With Gearbox 52 Mm*52 Mm
Contact me for free samples and coupons.
Wechat: 0086 18588475571
If you have any concern, we provide 24-hour online help.x
|Product Name||Gearbox Stepper Motor||Resistance||30 Ohms/Phase|
|Insulation Resistance||100MΩ Min.500VC DC||Rated Voltage||9.6 V|
|Holding Torque||10 Kg.cm||Inductance||20 MH/Phase|
|Radial Play Of Shaft||≤0.03||Thrust Play Of Shaft||≤0.1|
|Current||1 A||Step Angle||1.8 Degree|
|Certification||CE ROHS ISO||Insulation Class||B|
1.8Degree Stepper Motor With Gearbox,
9.6V Stepper Motor With Gearbox,
Nema 23 Stepper Motor 52Mm
Nema 23 52 Mm*52 Mm 9.6 V 1 A 1.8 Degree Stepper Motor With Gearbox Factory Price
A hybrid stepper motor is a combination of the variable reluctance and permanent magnet type motors. The rotor of a hybrid stepper motor is axially magnetized like a permanent magnet stepper motor, and the stator is electromagnetically energized like a variable reluctance stepper motor. Both the stator and rotor are multi-toothed.
Stepper motor is a kind of induction motor. Its working principle is to use electronic circuit to convert direct current into time-sharing power supply, multi-phase sequential control current, use this current to power the stepper motor, the stepper motor can work normally. The driver is a time-sharing power supply for the stepper motor, a multi-phase sequential controller.
GEARBOX Electrical Specification
Out diameter 56mm Powder metallurgy
|Housing material||Bearing at output||Radial load(10mm from flange)N||Shaft axial load(N)||Shaft press-fit force max(N)||Radial play of shaft(mm)||Thrust play of shaft(mm)||Backlash at no-load (°)|
|Powder metallurgy||sleeve bearings||≤450||≤200||≤1000||≤0.03||≤0.1||≤1.5|
|Reduction ratio||Rated tolerance torque (Nm)||Max momentary tolerance torque (Nm)||Efficiency%||
|Weight(g)||Number of gear trains|
Stepper Motor Final Inspection
|Measure the Length & Diameter of the shaft||Measure the Shape of the flange||Measure the Baby Length|
|Measure the Outer Diameter of Spigot||Measure the Length of Spigot||Measure the Screw Hole Distance|
|Test the Resistance||Test the Inductance||Measure the Wire Length|